A Collection of Game Repairs Post #1
This repair post will span over two separate parts. Part #1 covers these three pinball machines and an NBA Jam Tournament Edition. All of…
Case studies from the bench
Repair Log
Bally/Stern Model 101 Test Fixture Repair
This is a Bally/Stern 101 Test Fixture by Universal Module Company. I had never seen or heard of one of these until a few…
Williams Demolition Man
This one came in with general illumination issues and a ground short issue keeping the game from booting and playing. The general illumination circuit…
WPC89 Driver Board from a Bram Stoker’s Dracula
This one came in with no 12 volts and to check a questionable solder job on Q24. The board had had some work done…
Jaws Pro Mods Installed
I installed several mods on a very nice Jaws Pro today including: Expressions Speaker Lights Lighted Flipper Buttons Quint’s Shack 3D modeled and lighted…
WPC Driver Board from a Jackbot
The problem The board arrived with a blown F105 fuse per the client. Testing revealed that Q48 was shorted. The repair Testing The completed…
A rare one we’re putting out on the floor at work
A rare one we’re putting out on the floor at work today. I put in a new 3 prong power connector, big blue and rebuilt the on board power supply. One bi-polar prom at…
Helped with an unboxing and setting up today 👀
Helped with an unboxing and setting up today 👀
Data East Tommy
Data East Tommy — Came in not booting at all. The board had corrosion damage from the batteries on it that I had to clean up, pull affected parts, sand down the preformal coating,…
There is definitely truth to the saying that the Cobbler’s kids
There is definitely truth to the saying that the Cobbler’s kids go without shoes. I’ve had this game since 2013 and it’s never been fully torn down and shopped. It was partially shopped out…