Bally Party Zone –
Some of the work was a little spread out on this, so I’ll try to remember everything.
I put on new side rails and hinges since those were so busted up from a tumble it took. There was a loss in continuity on the D6 line on the CPU that was causing ground shorts and test button + not to work right among other things. The 4N25 for the right flipper was blown causing the lane changes on that side not to work, replaced and socketed it. One u shaped opto was bad on Captain bizarre causing him not to spin correctly, replaced it. Put on a new lock for the one I had to pop off, new balls as they were pitted a little, and two wires down below for the back popper pulled from their connector which I put a new connector on for them.
An LED OCD board was installed with a specialized LED kit from Comet for this game, bright ring mod for cosmic cottage and a new cosmic cottage added as the mounts on the old one were broken. New ramps were installed, the plasma mod was added, and mirror blades were added as well.
